Posts Tagged Arch Linux

Samba vs NFS on DNS-323

So far, I was using Samba to share the files stored on my D-Link DNS-323. However, people tend to say that NFS is quicker than Samba. So let’s benchmark those two protocols and figure out which one is actually quicker.

First of all, here is my configuration:

Server Client
D-Link DNS-323
Linux dlink-5610E5
Samba 3.0.24
UNFS3 0.9.20
Raspberry Pi
Linux alarmpi 3.6.11-15-ARCH+
CIFS utils 6.1-1
NFS utils 1.2.8-9

I used IOzone to benchmark these protocols from the Raspberry Pi. You can find the package for Arch Linux ARM on one of my previous post.

I first mounted the Samba and NFS share drives in the two respective folders /mnt/storage_smb and /mnt/storage_nfs.

I then ran the following commands (not at the same time):

iozone -RazcR -U /mnt/storage_smb -f /mnt/storage_smb/testfile -b smb_excel_output.xls
iozone -RazcR -U /mnt/storage_nfs -f /mnt/storage_nfs/testfile -b nfs_excel_output.xls

You can download the output files here and here.

Or, you can simply have a look at a summary of these two files in the following table which basically compare the average speed (in Kbytes per second) for both Samba and NFS:

Samba NFS
Write 7683 6676
Re-write 7544 6795
Read 21862 50464
Re-read 22383 50210
Random read 6348 6444
Random write 7603 6751
Backward read 5909 5246
Record rewrite 80294 87225
Stride read 15629 11868
Fwrite 7471 6700
Re-fwrite 7494 6671
Fread 7739 7685
Re-fread 7596 7639

As you can see, it looks like NFS is quicker for read operations but slower for write operations than Samba. But please remember that this is true for this very specific configuration ; It could be completely different for another one.

In conclusion, I personally decided to use both Samba and NFS depending of what I need. If I need a read only access to my data, I use NFS. However, if I need to write data, I use Samba.

NB: Another reason why I didn’t completely stop using Samba is because symbolic links don’t work with NFS. Instead, you need to use binding (mounting a folder inside another folder), but this is kind of incompatible with my use of rsync to backup my data. 🙁

, , , , , , ,

No Comments

IOzone for Arch Linux ARM

For different benchmarks I will later publish on this blog, I wanted to use IOzone. Unfortunately, this package is not available on Arch Linux ARM via the pacman package manager.

This tool is not difficult to compile, but still I decided to create an Arch Linux ARM package for it and share it with you: iozone-3_414-1-armv6h.pkg.tar.xz

You can install it using the following command:

pacman -U iozone-3_414-1-armv6h.pkg.tar.xz

Please note that I also tried to submit the package to the AUR (Arch User Repository). To my surprise, it was already present ( but not available for ARM. 🙁

, , , , ,

No Comments